Home › Concrete Sealing and Maintenance
Superior Concrete Greensboro offers concrete sealing and maintenance services that protect your investment in Greensboro, NC. We seal driveways, patios, sidewalks, and slabs to resist moisture, stains, and freeze thaw cycles. Contact us for a maintenance plan and free concrete sealing estimate tailored to your property.
Superior Concrete Greensboro provides professional concrete sealing throughout Greensboro, NC, North Carolina and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (336) 814-8750 or request your free quote.
Concrete Sealing in Greensboro That Fits Our Climate
Concrete in Greensboro takes a beating. Hot summers, freeze-thaw cycles in winter, tree pollen, and red clay all work into the pores of your concrete and break it down. Sealing is how you slow that damage, keep stains from setting in, and make cleaning easier.
Superior Concrete Greensboro focuses on matching the sealer to the way you actually use the concrete. A driveway in Starmount or Summerfield that sees hot tires and de-icer needs a different product than a covered back patio near Lake Brandt or a warehouse floor off West Market Street. We look at sun exposure, shade, drainage, traffic, and the age of the slab before we even talk about which sealer to use.
For most exterior projects in Greensboro, we use penetrating sealers, usually a silane siloxane blend, that soak into the surface instead of sitting on top like a shiny coating. These keep water and de-icing salts out, but do not make the concrete slippery and do not peel. For decorative stamped concrete around pools or colored patios, we may recommend a film-forming acrylic sealer with a grit additive so you still have traction when it is wet.
Greensboro water and soil tend to leave rust and clay stains if concrete is unprotected. Sealing gives you a cleanable surface so that oil leaks, fertilizer, grill grease, and clay wash off instead of soaking in. That is the main reason we see homeowners calling us after just a few years in a new subdivision. The concrete itself is fine, but the unsealed surface looks tired and blotchy long before it should.
How We Seal Your Concrete Step by Step
Good concrete sealing is mostly about preparation. Superior Concrete Greensboro follows a repeatable process so the sealer bonds correctly and wears evenly.
1. Inspection and moisture check. We start by checking for cracks, spalling, and previous coatings. If there is an old sealer, we test how well it is bonded and whether it is breathable. We also check for moisture coming up through the slab, especially in shaded or low spots, because a non-breathable product on a damp slab will blister and turn cloudy.
2. Deep cleaning. We remove surface dirt with a blower, then use a commercial pressure washer with the right tip so we clean without etching the surface. For driveways and garages, we pre-treat oil with a degreaser and rust spots with a rust remover that is safe for concrete. In older Greensboro neighborhoods with mildew in shaded areas, we may use a light cleaner to kill organic growth so it does not bleed back through.
3. Repairs before sealing. Cracks, pitting, and spalls are fixed before any sealer goes down. We use flexible polyurethane or epoxy crack fillers depending on whether the crack is still moving. Small pop-outs are cleaned, primed, and filled with a high strength repair mortar. Sealing over damage only locks in the problem and makes repair harder later.
4. Surface dry time. After washing, we typically need 24 hours of dry weather in Greensboro for exterior concrete. In cooler, damp weather, it may take a bit longer. We schedule sealing around local forecasts rather than squeezing a job in between storms, because trapped moisture is one of the fastest ways to ruin a sealer job.
5. Application. We apply penetrating sealers with low pressure sprayers and work them in with brooms or rollers where needed to avoid lines and puddles. For acrylic or decorative sealers, we usually roll the first coat and spray the second to even out coverage. Around pools, steps, and sloped walks, we broadcast a non-slip grit into the first coat, then lock it in with the second.
6. Curing and return to service. Most products we use are dry to touch in a few hours, but vehicle traffic usually needs to wait 24 to 48 hours. We block off driveways so no one drives on them too early. For commercial sites in Greensboro, we can phase work by sections so your business keeps operating while the sealer cures.
What Drives the Cost and How to Plan Your Budget
Concrete sealing in Greensboro is not a one-price-fits-all service. Superior Concrete Greensboro explains pricing upfront so you know what you are paying for and where you can save money.
The main factors are:
• Square footage and layout. Wide open driveways cost less per square foot than small, cut-up patios with lots of posts, steps, and edges. The more time we spend cutting in around brick, siding, or landscaping, the higher the labor portion of the job.
• Condition of the concrete. A relatively clean, crack-free slab is mostly cleaning plus sealer. If we have to strip an old failing sealer, remove heavy oil, or do a lot of crack and spall repair, that adds cost. Many Greensboro homes built in the last 10 to 15 years have decent concrete that just needs light prep, while 30 to 40 year old slabs often need more work.
• Type and quality of sealer. Penetrating silane siloxane products cost more than basic water repellents, but last longer and perform better against our freeze-thaw cycles and de-icers. Decorative acrylic sealers with UV stabilizers and anti-slip additives also run higher than basic clear sealers. We can price a good, better, best option, then you choose what fits your plans for the property.
• Access and water source. If the work area is hard to reach, is up a long steep drive, or has no nearby water spigot, we account for that. For most Greensboro residential jobs, this is not a big factor, but some rural properties around Guilford County do require extra setup.
To keep costs in line, grouping areas together helps. Sealing your driveway and walks at the same time, or doing a neighbor's driveway in the same visit, can spread out mobilization costs. We also advise against very cheap sealers from big box stores that need reapplication every year. Paying slightly more for a professional grade product usually saves money over a 5 to 8 year period.
We are clear on what is and is not needed. If your concrete is too new, for example less than 30 days old, we will tell you to wait rather than charging you for a sealer that cannot bond correctly yet.
Maintenance, Resealing Intervals, and Local Issues
A single sealing does not make concrete maintenance free, but it does make routine care simple. Superior Concrete Greensboro explains what to expect before we leave so you are not guessing.
In our area of North Carolina, exterior penetrating sealers usually last 3 to 7 years, depending on sun exposure and traffic. South-facing driveways that get full sun and hot tires will wear faster than a shaded side walkway. Decorative acrylic sealers on stamped patios or pool decks may need a light refresh every 2 to 4 years to keep the color and sheen even.
Between sealing cycles, basic maintenance is straightforward:
• Sweep or blow off leaves, acorns, and debris so they do not trap moisture and stain.
• Rinse a couple of times a year with a garden hose or light pressure wash. Avoid pointing a high pressure tip directly at expansion joints or edges.
• Clean spills quickly. Oil, brake fluid, fertilizer, and grill grease are less likely to stain sealed concrete, but removing them early is still best.
We strongly suggest avoiding harsh acids or strong degreasers from auto parts stores unless we have approved them for your specific slab and sealer. Many of those products can strip or weaken the sealer and etch the concrete under it.
Local conditions matter too. Greensboro gets enough freeze-thaw days that we advise against traditional rock salt on your sealed concrete. Instead, we recommend calcium magnesium acetate or similar de-icing products that are easier on both concrete and sealer. In neighborhoods with heavy shade and trees, like older parts of Irving Park or Fisher Park, we also watch for moss and mildew that can make surfaces slick. Sealed concrete is easier to treat, but sometimes we suggest more frequent light cleanings.
If you live in an HOA community around Greensboro, some associations specify a consistent look for driveways and front walks. A very glossy sealer may not be allowed. We are familiar with that and can use a penetrating or low sheen product that protects the surface without changing the appearance dramatically.
Why Work With Superior Concrete Greensboro for Sealing and Upkeep
Concrete sealing sounds simple until you have a peeling, blotchy driveway or a slick patio. The difference is in the prep, the product match, and the details. Superior Concrete Greensboro treats sealing and maintenance as part of the life plan for your concrete, not a quick add-on.
We start with a site visit, not just an estimate over the phone. We look at drainage patterns, where water collects after a Greensboro thunderstorm, how vehicles move on and off the slab, and what de-icers you use in winter. That tells us whether you need more focus on water repellency, stain resistance, or slip resistance.
If you already had a bad sealing job, we are comfortable fixing it. Common problems we deal with in Greensboro include cloudy or white acrylic sealers from trapped moisture, hot tire pickup where low quality sealers stick to warm tires and peel, and slick pool decks treated with the wrong product. In many cases, we can strip or mechanically abrade the failing coating and replace it with a breathable, non-slip system.
Communication is simple and direct. We schedule around the weather, tell you exactly when you can walk and drive on each area, and give you written care instructions. For commercial clients, we can work evenings or weekends to minimize disruption and can set up a recurring maintenance plan that includes periodic inspections and resealing where needed.
Superior Concrete Greensboro is fully insured and focused on concrete work only. We are not a painting company occasionally rolling sealer. Because we also pour and repair concrete, we understand how the slab was likely placed, what mix it probably is for our region, and how that affects which products will actually stay put.
If you want concrete sealing and maintenance that holds up to Greensboro weather and real everyday use, we can inspect your current surfaces, explain your options in plain terms, and give you a straightforward written proposal before any work begins.
